Perspectives on push–pull chromophores derived from click-type [2 + 2] cycloaddition–retroelectrocyclization reactions of electron-rich alkynes and electron-deficient alkenes

• Michio Yamada

Beilstein J. Org. Chem. 2024, 20, 125–154, doi:10.3762/bjoc.20.13

• solution as well as contradictory propensity to form luminescent nanostructure suspensions in hexane (Figure 5) [137]. It was posited that 65 features hollow vesicles, with vesicle fusion releasing curvature energy, leading to a thermodynamically more stable tubular structure. Such aggregation-induced

• -emission (AIE)-active aggregates exhibit emissive behavior in hexane, with an emission peak at 679 nm and a shoulder at 717 nm along with a fluorescence quantum yield of 8.5%. This luminescence phenomenon can be aptly considered to be AIE, considering the pronounced constraints imposed on molecular

Trifluoromethylated hydrazones and acylhydrazones as potent nitrogen-containing fluorinated building blocks

• Zhang Dongxu

Beilstein J. Org. Chem. 2023, 19, 1741–1754, doi:10.3762/bjoc.19.127

• oxidation/cyclization with NXS or Cu(OAc)2. Notably, some of the resultant CF3-substituted 1,6-dihydropyridazines exhibited aggregation-induced emission [102][103] (Scheme 16). The hydrocyanation of acylhydrazones is an important method for the preparation of α-hyrazino acids. Hu et al. reported a Lewis

Quinoxaline derivatives as attractive electron-transporting materials

• Zeeshan Abid,
• Liaqat Ali,
• Sughra Gulzar,
• Faiza Wahad,
• Raja Shahid Ashraf and
• Christian B. Nielsen

Beilstein J. Org. Chem. 2023, 19, 1694–1712, doi:10.3762/bjoc.19.124

• . explored the modulation of optoelectrochemical properties and thermal characteristics of pyridopyrazino[2,3-b]indole-based Qx46 series with varying substituents, i.e., bromine, chlorine, methyl and nitro group. Their study revealed inbuilt ICT and aggregation-induced emission (AIE) effects, forming

A deep-red fluorophore based on naphthothiadiazole as emitter with hybridized local and charge transfer and ambipolar transporting properties for electroluminescent devices

• Suangsiri Arunlimsawat,
• Patteera Funchien,
• Pongsakorn Chasing,
• Atthapon Saenubol,
• Taweesak Sudyoadsuk and
• Vinich Promarak

Beilstein J. Org. Chem. 2023, 19, 1664–1676, doi:10.3762/bjoc.19.122

• aggregation-induced emission (AIE) luminogen. The experimental (solvatochromic and emission in THF/water mixtures studies) and theoretical investigations prove that TPECNz retains cooperative hybridized local and charge transfer (HLCT) and weak AIE features. Thanks to its D–A–D-type structure with a proper

• , respectively, providing well-balanced ambipolar characteristics. On the other hand, the attached 4-(1,2,2-triphenylvinyl)phenyl (TPE) moiety would induce aggregation-induced emission (AIE) as feature into the molecule. It was suspected that AIE would restrain the aggregation-caused quench (ACQ) and the energy

pH-Responsive fluorescent supramolecular nanoparticles based on tetraphenylethylene-labelled chitosan and a six-fold carboxylated tribenzotriquinacene

• Nan Yang,
• Yi-Yan Zhu,
• Wei-Xiu Lin,
• Yi-Long Lu and
• Wen-Rong Xu

Beilstein J. Org. Chem. 2023, 19, 635–645, doi:10.3762/bjoc.19.45

• , PR China 10.3762/bjoc.19.45 Abstract We synthesized a new tetraphenylethylene-modified chitosan bioconjugate, CS-TPE, that shows the aggregation-induced emission effect. It can self-assemble into fluorescent polymeric nanoparticles in an aqueous solution at pH 5.3 either alone or with the water

• -induced emission (AIE) character [20][21]. Chitosan (CS) is a natural cationic polysaccharide, which is considered an ideal material for the construction of drug delivery systems due to its nontoxic, biocompatible, biodegradable, and easily functionalized properties [22]. Herein, we designed and

• , conventional fluorescent dyes exhibit aggregation-caused quenching (ACQ) when introduced into nanoparticles at high loads, resulting in poor fluorescence imaging quality. In recent years, tetraphenylethylene (TPE)-based dyes have been frequently used to overcome the ACQ problem due to their unique aggregation

Supramolecular approaches to mediate chemical reactivity

• Pablo Ballester,
• Qi-Qiang Wang and
• Carmine Gaeta

Beilstein J. Org. Chem. 2022, 18, 1463–1465, doi:10.3762/bjoc.18.152

• supramolecular nanostructures, displayed aggregation-induced emission (AIE) due to the restricted phenyl-ring rotation of m-TPEWP5 component. Inspired by natural photosynthesis and following an energy transfer process, the supramolecular nanorod assembly was employed as a nanoreactor for a photocatalytic

Computational model predicts protein binding sites of a luminescent ligand equipped with guanidiniocarbonyl-pyrrole groups

• Neda Rafieiolhosseini,
• Matthias Killa,
• Thorben Neumann,
• Niklas Tötsch,
• Jean-Noël Grad,
• Alexander Höing,
• Thies Dirksmeyer,
• Jochen Niemeyer,
• Christian Ottmann,
• Shirley K. Knauer,
• Michael Giese,
• Jens Voskuhl and
• Daniel Hoffmann

Beilstein J. Org. Chem. 2022, 18, 1322–1331, doi:10.3762/bjoc.18.137

• interactions with other proteins. Here, we use a computational approach to predict the binding sites of the designed hybrid compound featuring aggregation-induced emission luminophores as a potential supramolecular ligand for 14-3-3ζ in the presence and absence of C-Raf peptides. Our results suggest that the

• -3-3ζ decreases with the amount of 1 added. In fact, using default atomic charges [27][28], the 14-3-3ζ dimer has a net charge of −32 |e| (proton charges), and the binding of two 1 leads to a net charge of −24 |e| of the complex. It is known that aggregation-induced emission is caused by the blocking

Syntheses of novel pyridine-based low-molecular-weight luminogens possessing aggregation-induced emission enhancement (AIEE) properties

• Masayori Hagimori,
• Tatsusada Yoshida,
• Yasuhisa Nishimura,
• Yukiko Ogawa and
• Keitaro Tanaka

Beilstein J. Org. Chem. 2022, 18, 580–587, doi:10.3762/bjoc.18.60

• -concentration solutions, and their emission efficiency, chromogenic properties, and light sensitivity decrease rapidly [5][6]. In recent years, contrary to conventional fluorescent compounds, aggregation-induced emission enhancement (AIEE)-based compounds that exhibit strong fluorescence in aggregate structures

• -induced emission enhancement (AIEE) properties in aqueous media. Compounds 4a and 4e, bearing electron-withdrawing groups (Br and CF3, respectively) showed 7.0 and 15 times fluorescence enhancement. Time-dependent density functional theory (TD-DFT) calculations were performed to gain better insight into

• photophysically and computationally. The photophysical studies revealed that all the synthesized compounds exhibited fluorescence in organic solvents, while N-methyl-4-((pyridin-2-yl)amino)-substituted maleimide derivatives 4a–e, which are based on an acceptor–donor–acceptor (A–D–A) system, exhibited aggregation

Comparative study of thermally activated delayed fluorescent properties of donor–acceptor and donor–acceptor–donor architectures based on phenoxazine and dibenzo[a,j]phenazine

• Saika Izumi,
• Prasannamani Govindharaj,
• Anna Drewniak,
• Paola Zimmermann Crocomo,
• Satoshi Minakata,
• Leonardo Evaristo de Sousa,
• Piotr de Silva,
• Przemyslaw Data and
• Youhei Takeda

Beilstein J. Org. Chem. 2022, 18, 459–468, doi:10.3762/bjoc.18.48

• ). The PL spectrum is similar to that in a CBP host matrix (vide infra). The compound 1 showed an aggregation-induced emission (AIE) behavior in a THF/water system, showing a more red-shifted emission peak at around λem = 600 nm when compared with the as-prepared solid state (Figure S2 in Supporting

Tetraphenylethylene-embedded pillar[5]arene-based orthogonal self-assembly for efficient photocatalysis in water

• Zhihang Bai,
• Krishnasamy Velmurugan,
• Xueqi Tian,
• Minzan Zuo,
• Kaiya Wang and
• Xiao-Yu Hu

Beilstein J. Org. Chem. 2022, 18, 429–437, doi:10.3762/bjoc.18.45

• supramolecular self-assembled nanosystem based on host–guest interactions between water-soluble tetraphenylethylene-embedded pillar[5]arene (m-TPEWP5) and ammonium benzoyl-ʟ-alaninate (G) in an aqueous medium. The obtained assembly of m-TPEWP5 and G showed aggregation-induced emission (AIE) via the blocking of

• photosynthesis and exhibited a high catalytic efficiency for the photocatalytic dehalogenation reaction of various bromoketone derivatives with good yields in short reaction time in water. Keywords: aggregation-induced emission; Förster resonance energy transfer; host–guest interaction; photocatalysis

Recent developments and trends in the iron- and cobalt-catalyzed Sonogashira reactions

• Surendran Amrutha,
• Sankaran Radhika and
• Gopinathan Anilkumar

Beilstein J. Org. Chem. 2022, 18, 262–285, doi:10.3762/bjoc.18.31

• ) moiety since it can easily undergo aggregation-induced emission enhancement (AIEE). The self-assembly of the HPB derivative resulted in the formation of fluorescent aggregates, which can act as a stabilizer or as a reactor for the development of α-Fe2O3 nanoparticles at room temperature. The catalytic

Synthesis of dibenzosuberenone-based novel polycyclic π-conjugated dihydropyridazines, pyridazines and pyrroles

• Ramazan Koçak and
• Arif Daştan

Beilstein J. Org. Chem. 2021, 17, 719–729, doi:10.3762/bjoc.17.61

• exhibit photophysical properties such as photosensitization [13], fluorescence, and aggregation-induced emission (AIE) [14][15][16]. π-Conjugated polycyclic hydrocarbons (CPHs) containing polycyclic heteroaromatic molecules (PHAs) and aza-polycyclic aromatic hydrocarbons (aza-PAHs) have been attracting

Tuning the solid-state emission of liquid crystalline nitro-cyanostilbene by halogen bonding

• Subrata Nath,
• Alexander Kappelt,
• Matthias Spengler,
• Bibhisan Roy,
• Jens Voskuhl and
• Michael Giese

Beilstein J. Org. Chem. 2021, 17, 124–131, doi:10.3762/bjoc.17.13

• fluoroiodoazobenzenes with varying fluorination degree at the iodobenzene moiety was used to investigate the impact of halogen bonding on the properties of the assemblies. Since cyanostilbene molecules are known to show aggregation-induced emission (AIE) behaviour the photophysical properties of the resulting

• -induced emission properties were combined with alkoxystilbazoles to form hydrogen-bonded mesogens. Since NO2-Cn is known to be fluorescent, we were curious how the formation of the halogen-bonded complexes affects the AIE behaviour of NO2-Cn. Therefore, we studied the photophysical properties of 1:1

• interactions and packing in the solid state and adds to the shift of the crystallisation temperature. Photophysical studies Recently, our group has shown that self-assembly provides an efficient way to tune fluorescence behaviour of liquid crystalline materials [21]. Phenolic thioethers showing aggregation

Circularly polarized luminescent systems fabricated by Tröger's base derivatives through two different strategies

• Cheng Qian,
• Yuan Chen,
• Qian Zhao,
• Ming Cheng,
• Chen Lin,
• Juli Jiang and
• Leyong Wang

Beilstein J. Org. Chem. 2021, 17, 52–57, doi:10.3762/bjoc.17.6

• ; inversion of CPL handedness; Tröger's base; Introduction Recently, much effort has been devoted to constructing luminescent materials with efficient high emission in the solid state [1][2][3]. More and more types of fluorophores with aggregation-induced emission (AIE) characteristics have been discovered

Naphthalonitriles featuring efficient emission in solution and in the solid state

• Sidharth Thulaseedharan Nair Sailaja,
• Iván Maisuls,
• Jutta Kösters,
• Alexander Hepp,
• Andreas Faust,
• Jens Voskuhl and
• Cristian A. Strassert

Beilstein J. Org. Chem. 2020, 16, 2960–2970, doi:10.3762/bjoc.16.246

• substitution and environment is reported with potential applications in sensing, bioimaging and optoelectronics. Keywords: aggregation caused quenching (ACQ); aggregation-induced emission enhancement (AIEE); naphthalonitriles (NCNs); solution and solid state emitters (SSSE); solvent quenching (SQ

• introducing bulky substituents [11][12][13][14], enhanced Intramolecular Charge Transfer (ICT) character [15][16], cross-dipole packing [17] and J-aggregate formation [18][19][20][21][22]. Specifically, in 2001, Tang's group reported an exactly opposite phenomenon to ACQ, namely aggregation-induced emission

• strategies to overcome ACQ. Up to date, various AIE materials with efficient luminescence have been synthesized for diverse applications [28][29][30][31][32]. The discovery of AIE and especially aggregation-induced emission enhancement fluorogens (AIEEgens) further incentivized the synthesis and analysis of

Synthesis of 1,4-benzothiazinones from acylpyruvic acids or furan-2,3-diones and o-aminothiophenol

• Ekaterina E. Stepanova,
• Maksim V. Dmitriev and
• Andrey N. Maslivets

Beilstein J. Org. Chem. 2020, 16, 2322–2331, doi:10.3762/bjoc.16.193

• potential Cu2+ chemosensors [14], and their BF2 chelates, as multicolor fluorescence complexes, some of which exhibited aggregation-induced emission (AIE) properties [15]. In addition, enaminones I and II proved themselves to be versatile and available building blocks for the synthesis of various

Controlling the stereochemistry in 2-oxo-aldehyde-derived Ugi adducts through the cinchona alkaloid-promoted electrophilic fluorination

• Yuqing Wang,
• Gaigai Wang,
• Anatoly A. Peshkov,
• Ruwei Yao,
• Muhammad Hasan,
• Manzoor Zaman,
• Chao Liu,
• Stepan Kashtanov,
• Olga P. Pereshivko and
• Vsevolod A. Peshkov

Beilstein J. Org. Chem. 2020, 16, 1963–1973, doi:10.3762/bjoc.16.163

• -triggered complexation with boron trifluoride diethyl etherate. The resulting O,O-chelated boron complexes 11 turned out to be strong solid-state emitters featuring clear aggregation-induced emission (AIE) characteristics [61]. Encouraged by these results, we decided to attempt the reaction of 2-oxo

Synthesis of new fluorescent molecules having an aggregation-induced emission property derived from 4-fluoroisoxazoles

• Kazuyuki Sato,
• Akira Kawasaki,
• Yukiko Karuo,
• Atsushi Tarui,
• Kentaro Kawai and
• Masaaki Omote

Beilstein J. Org. Chem. 2020, 16, 1411–1417, doi:10.3762/bjoc.16.117

• -opening reaction of 4-fluoroisoxazoles and exhibited highly fluorescent luminescence and aggregation-induced emission (AIE), showing promise as a new fluorophore. Keywords: aggregation-induced emission; boron ketoiminates; fluorescent probe; α-fluorinated boron ketoiminates; 4-fluoroisoxazoles

• concentrated solutions by aggregation-caused quenching (ACQ) [8]. On the other hand, there are molecules that exhibit strong emission even in poor solvents or in the solid state. This property is referred to as aggregation-induced emission (AIE) and has attracted much attention in the field of fluorescence

Synthesis and properties of quinazoline-based versatile exciplex-forming compounds

• Rasa Keruckiene,
• Simona Vekteryte,
• Ervinas Urbonas,
• Matas Guzauskas,
• Eigirdas Skuodis,
• Dmytro Volyniuk and
• Juozas V. Grazulevicius

Beilstein J. Org. Chem. 2020, 16, 1142–1153, doi:10.3762/bjoc.16.101

• ; quinazoline; Introduction Organic luminescent materials are extensively used in a wide range of optoelectronic devices. For the design of compounds, potentially exhibiting properties such as bipolar charge transport, delayed fluorescence or aggregation-induced emission enhancement (AIEE), a useful strategy

Emission solvatochromic, solid-state and aggregation-induced emissive α-pyrones and emission-tuneable 1H-pyridines by Michael addition–cyclocondensation sequences

• Natascha Breuer,
• Irina Gruber,
• Christoph Janiak and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2019, 15, 2684–2703, doi:10.3762/bjoc.15.262

• emission solvatochromism. Also a donor-substituted α-pyrone shows pronounced aggregation-induced emission enhancement. Keywords: cyclocondensation; DFT calculations; fluorescence; heterocycles; 1H-pyridines; α-pyrones; Introduction A high sensitivity and precise tuneability of fluorescence colors are

• the solid state. This finding suggests that by restricting intramolecular motion and vibration, which enables radiation-less deactivation of the excited state [61], an AIE (aggregation‐induced emission) or AIEE (aggregation-induced enhanced emission), might become operative [62][63][64]. The AIE or

• quantum yield of 99% in solution and 11% in the solid state was achieved. Interestingly, the isomeric p-N,N-dimethylaminophenyl substitution in 6-position represents a system with aggregation-induced emission enhancement. These design principles of luminescent 1H-pyridines and α-pyrones as polarity

Aggregation-induced emission effect on turn-off fluorescent switching of a photochromic diarylethene

• Luna Kono,
• Yuma Nakagawa,
• Ayako Fujimoto,
• Ryo Nishimura,
• Yohei Hattori,
• Toshiki Mutai,
• Nobuhiro Yasuda,
• Kenichi Koizumi,
• Satoshi Yokojima,
• Shinichiro Nakamura and
• Kingo Uchida

Beilstein J. Org. Chem. 2019, 15, 2204–2212, doi:10.3762/bjoc.15.217

• is one of the examples which express the mechanisms of aggregation-induced emission (AIE). This compound emits orange fluorescence with a large Stokes shift derived from ESIPT in aprotic solvents such as THF or hexane, while it exhibits only a photochromic reaction in protic solvents such as methanol

• points of view, such as sensors, electroluminescent displays, memory devices [9]. On the other hand, molecular aggregation also affects the intensity of fluorescence [10][11]. Some material shows fluorescence by aggregation (aggregation-induced emission (AIE)), while the others decay the fluorescence by

Synthesis, enantioseparation and photophysical properties of planar-chiral pillar[5]arene derivatives bearing fluorophore fragments

• Guojuan Li,
• Chunying Fan,
• Guo Cheng,
• Wanhua Wu and
• Cheng Yang

Beilstein J. Org. Chem. 2019, 15, 1601–1611, doi:10.3762/bjoc.15.164

• enantiopure P5A-DPA and P5A-Py. It was found that the CD signals were enhanced by aggregation. P5A-DPA showed aggregation-induced emission enhancement, while P5A-Py showed aggregation-induced emission quenching, accompanied by excimer emission when aggregating in water and THF mixed solution. Keywords

Complexation of a guanidinium-modified calixarene with diverse dyes and investigation of the corresponding photophysical response

• Yu-Ying Wang,
• Yong Kong,
• Zhe Zheng,
• Wen-Chao Geng,
• Zi-Yi Zhao,
• Hongwei Sun and
• Dong-Sheng Guo

Beilstein J. Org. Chem. 2019, 15, 1394–1406, doi:10.3762/bjoc.15.139

• intramolecular charge-transfer dyes. Phosphated tetraphenylethylene was involved as the classical aggregation-induced emission dye. Sulfonated acedan representing one example of two-photon fluorescent probes, was also investigated. A ruthenium(II) complex with carboxylated bipyridyl ligands was included as a

• charge-transfer dyes. P-TPE was included in the study as a classical aggregation-induced emission (AIE) dye and TPS as a representative of a two-photon fluorescent probe. Ru(dcbpy)3 was involved as a member of luminescent transition-metal complexes. Of our special interest in the present study is to

Structure–property relationships and third-order nonlinearities in diketopyrrolopyrrole based D–π–A–π–D molecules

• Jan Podlesný,
• Lenka Dokládalová,
• Oldřich Pytela,
• Adam Urbanec,
• Milan Klikar,
• Numan Almonasy,
• Tomáš Mikysek,
• Jaroslav Jedryka,
• Iwan V. Kityk and
• Filip Bureš

Beilstein J. Org. Chem. 2017, 13, 2374–2384, doi:10.3762/bjoc.13.235

• ]. Moreover, some DPP derivatives also showed aggregation induced emission (AIE) [13][14] and the ability to selectively sense fluoride ions [26][27][28]. The modern era of DPP chromophores has been opened by Gryko et al. [3][11][12][18][20][21][29] who have demonstrated their large and tunable two-photon

One-pot syntheses of blue-luminescent 4-aryl-1H-benzo[f]isoindole-1,3(2H)-diones by T3P^® activation of 3-arylpropiolic acids

• Melanie Denißen,
• Alexander Kraus,
• Guido J. Reiss and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2017, 13, 2340–2351, doi:10.3762/bjoc.13.231

• by an integrating sphere. The emission maximum appears at 468.5 nm, i.e., at the same longest wavelength band as in solution. Therefore, 1H-benzo[f]isoindole-1,3(2H)-diones 4 can be considered as AIE (aggregation induced emission) chromophores [56][57][58]. In comparison to the 1-phenyl-[2,3-c